**SPECIAL ORDER - WILL ARRIVE AT THE SHOP TYPICALLY IN 3 WEEKS**
Watch:
https://www.youtube.com/watch?v=hT3SiVndNFg
RAPTOR TECHNOLOGY
Built to serve as a solution to the multi-gun and multi-caliber dilemma that suppressor owners face, the Raptor comes in a variety of lengths & calibers to suit your individual needs. Each Raptor suppressor connects via the provided Reflex mounting system or flush mount. You may also opt to utilize the Raptor Adapter to convert the base threads of the suppressor to the "industry standard" 1.375x24 thread pitch for use in conjunction with a wide array of QD mounts on the market.
The Raptor uses spiral shaped baffles to keep the gasses moving while reducing back pressure. Utilizing the Reflex mounting systems greatly increases the suppressor volume without increasing the overall length of the firearm.
The Raptor comes in 5.56mm, 7.62mm, .338cal and .375cal, as well as lengths from 2 spirals to 10 spirals, with Reflex mounting options from 1” to 5”.
Plain and simple, our spirals are designed to be more efficient.
Using spirals verses conical baffles gives the gases something to do rather than slamming into an angular wall or hard corner. By peeling gases off of the bore and sending them into a spin, we can greatly reduce the energy of those gases quickly and efficiently. As the gases lose energy, the spiral can be fed with more gases. This spinning effect burns off energy rather than trying to stop it.
AB Spiral Technology significantly reduces the back pressure created with each shot. The reduced pressure also creates a much lower tone, making for a more pleasant resonance at the shooter's ear.
In the box
Each Raptor suppressor is sold with a Reflex mount, flush mount, end cap and six pin tool.
reflex mounting system
A Reflex mount allows the suppressor to take advantage of the area around the barrel (otherwise unused) to significantly increase the blast chamber volume, without adding additional length to the weapon system.
For example, a 3 inch standard Reflex mount increases the blast chamber's total volume to 7.26 cubic inches, which is equal to 243% of a flush mount's respective volume.
Specifications
Reflex mounts are available for Standard Barrels up to 3/4” in diameter and Bull Barrels up to 1” in diameter. Stock reflex lengths are 1 inch, 2 inch, 3 inch, 4 inch, and 5 inch.
All reflexes are made out of premium titanium, have a 1.625” diameter and have a 5/8-24 mount.
AB SUPPRESSOR Raptor Suppressor Ti 5.56/3.08/.338/.375 Customizable
Must come into store to do electronic fingerprints, Form 4, and have your picture taken.
Must pass NFA background check.
Must pay the $200 tax stamp in additon to all else.
May purchase as an individual or as a Trust. We can create a trust in store for an additional $109.
Subject to NFA wait times.
